Skip to content
SearchSTART A PROJECT

Your design questions,
answered.

Planning a home, sending a part to a fabrication shop or preparing jewelry images for a catalog? Find the files to send, the work you can order and how pricing works.

76 practical answers connected to the pages where the full process, deliverables and project evidence live.
01 / 16 QUESTIONS

House & home

Custom homes, floor plans, renovations, additions and ADUs.

01Can you design a custom house from scratch?

Yes. Artimist can develop a custom home from a brief, site information, sketches, reference images or an early floor-plan idea. Depending on scope, the work can include layout development, exterior design, architectural drawings and 3D visualization so the design is understood before construction begins.

02Can you turn my rough sketch into a professional floor plan?

Yes. Hand sketches, marked-up PDFs, photographs and measured information can be translated into a clean architectural floor plan. Accuracy depends on the information supplied, so dimensions, existing drawings and site measurements are especially useful when the plan will be used for later design or documentation.

03Can you modify an existing floor plan?

Yes. Existing plans can be reviewed and changed to improve room sizes, circulation, privacy, storage, furniture fit and relationships between spaces. We can work from DWG, PDF, image files or a redrawn base plan, depending on what you already have.

04Can you improve a house plan without redesigning the whole house?

Yes. Many projects only need focused changes. We can study specific problems such as an awkward kitchen, poor circulation, small bedrooms, limited storage or an inefficient entrance while keeping the parts of the existing plan that already work.

05I need help with my floor plan. What should I send?

Send the clearest plan you have, the property location, important dimensions, photographs and a short list of what feels wrong. Explain who uses the space, what must remain and what decisions you are trying to make. We can then recommend whether you need a focused review, layout options, updated drawings or 3D views.

06Can you compare two floor plan or room layout options?

Yes. We can compare options using furniture fit, circulation, privacy, storage, daylight, structural implications and relationships between rooms. The goal is not to declare a winner without context, but to show which option best supports the priorities in your brief.

07Can you help with a bathroom remodel layout?

Yes. We can test the position and dimensions of the shower, bath, vanity, toilet, storage, doors and windows, then develop the preferred option in drawings or 3D. Plumbing, waterproofing, structure, ventilation and local requirements still need coordination before construction.

08Can you help with a kitchen remodel layout?

Yes. Kitchen studies can compare islands and peninsulas, appliance locations, storage, work zones, seating and circulation within the complete room plan. Once a layout works, 3D views can help confirm cabinet proportions, finishes and lighting before installation.

09Can you plan a small apartment or studio layout?

Yes. We can test furniture zones, built-in storage, work areas, sleeping arrangements and flexible uses using the actual dimensions of the space. A plan checks fit and movement, while 3D views help judge scale, light and how open the apartment will feel.

10Can you show me what my house will look like before it is built?

Yes. Floor plans and elevations can be developed into a 3D model and realistic exterior or interior views. This helps compare materials, proportions, windows, lighting and design options before expensive construction decisions are made.

11Can you design an addition to an existing house?

Yes. Artimist can help develop room additions, extensions, second-floor additions and related existing/proposed drawings. The final documentation required for approval depends on the local jurisdiction and whether structural or other licensed consultant input is required.

12Can you design an ADU?

Yes. We can develop detached backyard ADUs, attached ADUs and garage-conversion concepts, including floor plans, elevations, sections and 3D design support where required. Local zoning, setbacks, parking, utilities and permit requirements still need to be verified for the specific property.

13Can you convert a garage into an ADU or living space?

Yes. A garage conversion can be studied for layout, openings, access, kitchens, bathrooms, storage and exterior changes. Existing conditions and local regulations determine what is feasible, so accurate measurements and any available property information should be provided at the start.

14Can you work from old house plans or a property listing?

Yes. Old drawings, listing plans, real-estate images and site photographs can help establish the starting point. They are useful for design studies, but verified dimensions may still be needed before producing accurate existing-condition or permit-support documentation.

15What is the difference between custom house plans and stock house plans?

Stock plans are pre-designed for broad use. Custom house plans are developed around a particular brief, site, lifestyle and set of priorities. Custom work gives more control over room relationships, orientation, architectural character and future changes, but it also requires more design input and coordination.

16How much does a custom house plan cost?

Cost depends on project size, complexity, the starting information, required drawings, number of design options and whether visualization or permit-support documentation is included. We review the brief first so the fee reflects the actual scope rather than forcing every project into the same package.

02 / 16 QUESTIONS

Visualize it

3D interiors, exterior design, rendering, animation and real-time experiences.

01What is a 3D interior design service?

It combines interior design decisions with three-dimensional visualization. We can study layout, furniture, materials, lighting, color and spatial atmosphere, then show the proposed room in realistic views before renovation, purchasing or construction begins.

02What should I send for a 3D rendering of my restaurant interior?

Send the latest floor plan, any photos of the space and your finish or lighting references. Tell us what you need the images to help decide. For example, an entrance view can show the bar and seating layout, while a view from a table can help compare lighting and finishes. We agree the camera views and image sizes in the quote.

03Can you design my interior remotely?

Yes. Remote interior design can work from floor plans, measurements, photographs, videos and reference images supplied by the client. Clear dimensions and photographs are important because the accuracy of the 3D space depends on the quality of the existing information.

04Can I send Pinterest, Instagram or reference images?

Yes. Reference images are useful for communicating atmosphere, materials, furniture types and architectural preferences. We use them to understand direction rather than simply copying another project, then develop a coherent design for your own space.

05Can you turn a floor plan into a 3D model or rendering?

Yes. PDF, CAD or other architectural plans can be used to build a 3D model. Depending on the information available, we can then produce interior views, exterior views, material studies or presentation renderings from the same coordinated model.

06What is architectural rendering?

Architectural rendering is the creation of images that communicate a proposed building or interior before it exists. A rendering can be simple and diagrammatic or highly photorealistic, depending on whether the goal is design review, client approval, marketing, planning or final presentation.

07What is the difference between architectural rendering and visualization?

Rendering usually refers to the final image or output. Architectural visualization is the broader process of translating design information into understandable visual media, which can include still images, diagrams, animation, virtual tours and real-time interactive experiences.

08Can you create renderings from CAD or Revit files?

Yes. DWG, RVT, SketchUp and other model or drawing formats can provide the geometric starting point. We review the source files first because model quality, missing information and material detail can affect how much preparation is required before visualization begins.

09Can you create exterior and interior renderings for the same project?

Yes. When the source model and design information are coordinated, the same project can be developed into exterior, interior, aerial and detail views. This helps keep materials and architectural decisions consistent across the full presentation set.

10Can you create architectural animation and walkthroughs?

Yes. We produce cinematic walkthroughs, flythroughs and motion sequences for architecture, interiors and development presentations. The required model detail, shot list, duration and delivery format are agreed before production so animation effort stays aligned with the intended use.

11Can you create Unreal Engine or real-time architectural experiences?

Yes. Real-time environments can be developed when a project benefits from interactive movement, live material exploration or immersive presentation rather than only fixed images. We first determine whether Unreal Engine is the right delivery method for the project instead of using it where a conventional render would be more efficient.

12How much does an architectural rendering cost?

Rendering cost depends on the quality of the starting model, number of views, complexity, landscaping, furniture, level of realism, revisions and deadline. A single clean view from a well-prepared model is very different in scope from a full marketing set built from incomplete drawings.

13Do I need a 3D model before ordering an architectural rendering?

Not always. If you already have a usable Revit, SketchUp, Rhino or other 3D model, we can review it as the starting point. If you only have plans, elevations, sketches or reference images, model creation can be included in the scope before rendering begins.

14How long does architectural rendering take?

Timing depends on model readiness, view count, design complexity, required realism, resolution and review speed. A defined single-view brief can move faster than a multi-view marketing set that still needs modeling and design decisions. The schedule is confirmed after the source files and deliverables are reviewed.

15What counts as a rendering revision?

A revision adjusts an agreed image within the approved direction, such as a material, furniture item, lighting balance or camera refinement. A new design direction, rebuilt geometry, extra view or late architectural change can require additional scope because it changes the production work rather than only refining the image.

16What rendering resolution and file formats do you deliver?

Final images are normally supplied in agreed presentation formats such as JPG, PNG or TIFF at a resolution suited to screen, print, competition or marketing use. Native scene files, layered files, animation formats and unusually large outputs are included only when the proposal lists them.

03 / 10 QUESTIONS

Document it

Renovation drawings, permit support and construction documentation.

01What are permit drawings?

Permit drawings are documents used to communicate a proposed project to a building or planning authority. The exact required sheets vary by location and project type, but may include existing and proposed plans, elevations, sections, site information, notes and coordination with structural or other specialist documents.

02What drawings do I need for a home renovation?

That depends on the renovation. Common drawings include existing plans, demolition plans, proposed floor plans, elevations, sections and relevant details. Structural changes, additions, changes of use or jurisdiction-specific requirements may introduce additional engineering, code or consultant documentation.

03Can Artimist prepare drawings for permit submission?

Yes. We provide drafting, design and permit-support documentation based on the agreed scope. However, submission procedures, professional seals and licensed-professional requirements vary by jurisdiction, so local requirements must be confirmed for the specific project.

04Does Artimist stamp architectural drawings?

Artimist provides design, drafting and documentation services. Where a city, state, province or other authority requires documents to be reviewed, signed or stamped by a locally licensed architect or engineer, that licensed professional must provide the required professional certification.

05Can a local architect or engineer review drawings prepared by Artimist?

Yes, subject to that professional's own review process and local rules. We can coordinate our production with a client's locally licensed architect or engineer, respond to markups and revise the drawing package as required for their review.

06Can you prepare existing and proposed drawings for a renovation?

Yes. We can document the existing condition from reliable source information and prepare proposed plans, elevations or sections showing the intended changes. Verified measurements are important because permit and construction decisions should not rely on unconfirmed geometry.

07Can you revise drawings after permit comments?

Yes. If the review comments relate to our agreed drawing scope, we can update the package and coordinate the revisions. Comments requiring structural engineering, energy calculations, specialist reports or licensed professional judgment may need input from the relevant consultant.

08Can Artimist guarantee permit approval?

No. Permit approval is controlled by the relevant authority and depends on local regulations, property conditions, consultant requirements and the authority's review. We can prepare and revise documentation within our scope, but no design or drafting provider can responsibly guarantee an authority's approval.

09What is the difference between permit drawings and construction drawings?

Permit drawings focus on the information needed for regulatory review, while construction drawings communicate how the approved design is to be built and coordinated. There can be overlap, but construction documentation often requires more detail, specifications and coordination than a basic permit set.

10What information do you need to start permit-support drawings?

Useful starting information includes existing drawings, verified measurements, survey or site information where relevant, photographs, the proposed scope, local authority requirements and any consultant information already available. Better source information generally reduces assumptions and revision time.

04 / 15 QUESTIONS

Build the model

BIM, Revit, CAD conversion, Scan-to-BIM and production support.

01What BIM services does Artimist provide?

Our BIM work includes architectural modeling, Revit drafting, model development, drawing production, CAD-to-Revit conversion, PDF-to-Revit workflows, Scan-to-BIM support and coordinated documentation. Scope and model standards are defined before production begins.

02Can you convert AutoCAD drawings into Revit?

Yes. CAD drawings can be used as a basis for a Revit model, but the process is not simply an automatic file conversion. Geometry, levels, families, model organization, documentation requirements and the intended LOD must be agreed so the resulting Revit file is useful rather than only visually similar.

03Can you convert PDF drawings into Revit?

Yes. PDF drawings can be redrawn and modeled in Revit when they contain enough reliable information. Where dimensions or sections are missing, assumptions must be identified or resolved through additional source material before the model is treated as accurate.

04Do you provide Scan-to-BIM services?

Yes. Point-cloud or scan data can be translated into organized BIM geometry based on the required scope and level of detail. The expected accuracy, model elements and deliverables should be agreed before work starts because Scan-to-BIM requirements can vary significantly between surveys, existing buildings and facility-management uses.

05What is LOD 300?

LOD 300 generally describes model elements with defined size, shape, quantity, location and orientation suitable for coordinated design documentation. The exact interpretation should still be agreed within the project's BIM requirements because different teams can use LOD terminology differently.

06Can you produce LOD 350 BIM models?

Yes, when the project requires it. LOD 350 typically adds interfaces and relationships needed for greater coordination between building systems. We confirm which elements require that depth rather than applying unnecessary detail across an entire model.

07Can you work inside our existing Revit template?

Yes. Architecture and development teams can provide their templates, title blocks, view standards, naming conventions and project requirements. We aim to work inside the client's system rather than forcing a separate Artimist standard onto an established production workflow.

08Can you create Revit families, sheets and schedules?

Yes. Revit production can include project families, reusable families where appropriate, views, sheets, annotations, schedules and drawing organization. The exact family complexity and parameter requirements should be defined because lightweight documentation families and data-rich content are very different tasks.

09Can Artimist support an architecture firm with ongoing Revit or drafting work?

Yes. We can work as an external production extension for architecture, design, construction and development teams. This can be project-based or structured around a recurring workload, with clear task ownership, review stages and delivery standards.

10How do you check a Revit model before delivery?

Quality checks depend on the scope but can include model organization, warnings, naming, sheet consistency, view setup, family hygiene, duplicated content and agreed BIM standards. The goal is to return a model another team can continue using, not only a file that looks correct in screenshots.

11Do you provide Rhino 3D modeling services?

Yes. Artimist can build, rebuild, organize or refine Rhino models for architectural studies, product development, visualization and coordinated downstream use. We define whether the model is for design, rendering, documentation or fabrication because each purpose requires a different level of accuracy and organization.

12Can you build a render-ready Rhino model from drawings or sketches?

Yes. Plans, elevations, sections, CAD files, PDFs, dimensions and sketches can be used to construct a Rhino model. Missing information is identified before production, and the agreed scope states whether the result is a visual model or dimensionally controlled geometry.

13Can you repair or clean up an existing Rhino model?

Yes. Cleanup can include layer organization, duplicate removal, joined surfaces, normals, block structure, naming and geometry prepared for rendering or exchange. The model is reviewed first because repair effort depends on how it was originally constructed.

14Can you create an editable Grasshopper definition?

Yes. Parametric systems can be developed for repeatable geometry, facade studies, patterning, rationalization and controlled design variation. The inputs, outputs, Rhino version, plugins and documentation level are agreed in advance so another team can understand and continue using the definition.

15What is the difference between render-ready and fabrication-ready geometry?

Render-ready geometry needs to look correct from the required views. Fabrication-ready geometry must also meet agreed dimensional, tolerance, continuity, part-separation and output requirements for a specific manufacturing process. Fabrication suitability is never assumed from appearance alone.

05 / 02 QUESTIONS

Fabrication drawings

Get a part drawing or CAD model ready for a shop quotation.

01Can you turn a dimensioned part sketch into a STEP file for a shop quote?

Yes. Send the sketch, its units, the material and the shop’s file requirements. Mark any dimensions that are still approximate. We can quote a STEP model and identify the dimensions you need to confirm before the shop relies on it.

02Does my sheet metal shop need a flat DXF or a folded STEP model?

Ask the shop which format it quotes from. A flat DXF describes the cutting profile. A folded STEP model shows the part in three dimensions. For a bent part, share the thickness, bend requirements and any supplier instructions so the quote covers the right files.

06 / 02 QUESTIONS

Product & jewelry

Choose between editable CAD and finished images for a listing or catalog.

01I have a jewelry sketch. Should I ask for editable CAD or a render?

Ask for editable CAD if a designer or maker will change the size, setting or geometry later. Name the software or file format they need. If you need pictures for a listing, specify the views and finishes. A quote can cover both. Your maker should review the geometry before production.

02Can you show the same product in different finishes for my catalog?

Yes. Send the current CAD model, finish references and the image size your catalog needs. We can render the same angle under consistent lighting so shoppers can compare materials. If you only have photos or a sketch, we will scope the modeling first.

07 / 15 QUESTIONS

Work with us

Pricing, timelines, revisions, confidentiality and international delivery.

01What does Artimist Productions do?

Artimist Productions designs house plans and interiors, produces BIM models and architectural visualizations, prepares mechanical CAD and fabrication drawings, and creates product and jewelry models and renders.

02Do you work with homeowners directly?

Yes. Homeowners commonly approach us for custom house plans, floor-plan changes, additions, ADUs, renovation drawings, exterior design, 3D interior design and visualization. We explain what we can provide directly and where local licensed professionals or consultants may also be required.

03Do you work with architects, builders and developers?

Yes. Professional clients use Artimist for BIM, Revit, drafting, documentation, rendering, animation and production capacity. We can work behind an existing project lead, follow established standards and keep client-facing responsibility with the appointed architecture, design or development team.

04Do you work with clients in the United States?

Yes. Artimist works remotely with U.S. homeowners and professional teams. We can use imperial units and U.S. drawing conventions, but permit, stamp and code requirements remain jurisdiction-specific and must be verified for the city, county or state involved.

05Can you work internationally?

Yes. The studio is structured for remote international delivery and works with clients across multiple markets. Project standards, units, file formats, meeting times and local professional requirements are clarified at the beginning so the workflow fits the project location.

06How much do Artimist services cost?

Architecture and interior work is quoted to your brief. Mechanical design and fabrication drawings are $60/hour USD. Product and jewelry design and rendering are $50/hour USD. New ad hoc hourly requests have a two-hour minimum. A fixed-scope first milestone can start at $500 USD. You receive the scope, fee and payment schedule in writing before work starts.

07Which monthly studio package should I choose?

Choose by the amount of reserved capacity, number of simultaneous priorities, review rhythm and level of senior coordination you need. The $1,000 package suits a focused workstream; larger packages support more continuous or parallel production. We review the request before confirming the appropriate tier.

08Do you charge per project or per hour?

Both structures are possible depending on the work. Clearly defined deliverables often suit fixed project pricing, while evolving production support, revision-heavy work or ongoing team extension may be more appropriate on an hourly, daily or monthly basis.

09How long does a typical project take?

Timelines vary widely. A focused drafting or rendering task may take days, while a custom home, BIM model or coordinated documentation package can take much longer. The schedule is confirmed after reviewing the brief, source files, expected revisions and required delivery stages.

10How many revisions are included?

The included revision allowance is stated in the project agreement. As a general working principle, revisions apply to the agreed scope rather than unlimited redesign. New requirements, major changes after approval or added deliverables can be treated as additional scope.

11Does Artimist sign NDAs?

Yes. NDA and confidential working arrangements are available where appropriate. Professional clients can also request white-label or non-public delivery so unreleased projects, client information and production files are handled within the agreed confidentiality boundaries.

12Will my project automatically appear in the Artimist portfolio?

No. Confidentiality, publication rights and portfolio use depend on the project agreement and client permissions. Projects under NDA or with restricted publicity are handled accordingly.

13What should I send when requesting a quote?

Send a short description of the project, location, what you need delivered, your deadline and any available drawings, models, sketches, photographs or reference material. The clearer the source information, the more accurately we can define scope, schedule and price.

14What file formats can Artimist work with?

Common inputs include PDF, DWG, RVT, image files, sketches, presentation files, point-cloud data and 3D model formats. File compatibility is checked at the start because the usefulness of a source file depends on its actual content, organization and version.

15How do I start a project?

Use the project brief or contact page and send the core information you already have. We review the request, identify the required disciplines, clarify missing information and then confirm scope, timeline, deliverables and commercial terms before production begins.

Still specific?

Show us the
actual project.

If the answer depends on your property, drawings, model, deadline or local requirements, send the real brief. We can tell you what Artimist can handle, what information is missing and what should happen next.

Start a project ↗︎

ARTIMIST / INTERACTIVE STUDIO

Your project.
Every angle.

Work with us. Explore your model on our website.

No specialist software to learn. Choose a project, rotate it and zoom into the details directly in your browser.

EXPLORE THE INTERACTIVE STUDIO WALK THROUGH OUR SIGNATURE INTERIOR

15 PROJECT PREVIEWS · ROTATE · ZOOM · EXPLORE

Forest House twilight architectural visualizationFROM PRESENTATION TO EXPLORATION

Working standard

Clear before commitment.

Scope, confidentiality and handover are agreed in writing. Project-specific signed terms always take priority.

01

Scope first

Deliverables, timing, revisions and fees are agreed before production.

02

Confidential when needed

NDA-based workflows are available before sensitive files are shared.

03

Defined handover

Final PDFs, DWGs, RVTs, images, films or source files follow the written scope.

04

Honest local boundary

Required stamps, seals and statutory certification stay with the appropriately licensed local professional.

Permit-support may include package preparation, coordination and submission support when agreed. Artimist does not supply a regional architectural or engineering stamp; any legally required stamp, seal or certification must come from the appropriately licensed local professional. Read full client terms →